In this video Daniel Vincent Kelley details how to build an aeroponics garden. Aeroponic Grow Systems are said to grow food 10x faster than growing food in soil. Below is a link to an Amazon Store where I’ve compiled a list of all the necessary parts to build an aeroponics garden. Since completing the video I made an addition to my setup in the form of a third row of spray jets down the middle of the bin. I also lowered my spray jets in the bin a bit to widen out the spray of the jets, I did this by cutting each of the legs down a bit. I decided how much to lower it by running the system to fill the tubing, to maximize the pressure from the jets, then took an approximate measure of how high the jets were spraying above the ceiling of the bin. It got my floor a bit wet to remove the top while the spray jets were on, but a quick mop job took care of that. I also came to the conclusion that I needed to run the power cord for the pump through a hole in the top of the bin, to keep the lid on tight, thus keep the bin from leaking. Additionally I added a layer of silicon caulking to the rim of the bin top. Here’s the parts list on page 1 of my Amazon stores Aeroponics Garden section, the rest of the pages in that section are seeds you might consider growing in your aeroponics garden. astore.amazon.com The link below is the system from where I derived most of my parts list. I simplified their setup by going with a submersible pump thus eliminated any need to put holes in my bin …
Video Rating: 5 / 5
3 Responses to “Aeroponics Garden – How to Make Your Own”
Uhh Uhh… it’s a hole. Man your crazy. It’s funny though.
@edward944 That’s a good point. I didn’t have that problem with the pump, but I did have problems with the spray jets getting clogged before I flushed the pipes during the first cleaning.
Drilling the 1/8 holds after putting it all together is’nt a good thing,becase you get the shaveing from the drill will get into your pump and damage you pump.